Gopher traps are the best friends of a lawn owner who is having trouble with little gophers eating his home grown fruits and vegetables. A lot of people experience waking up to a garden full of holes and a vegetable patch that already looks half eaten. So the only way to address this kind of irritating issue is to directly shoot the main source of the problem which is the presence of rodents.
Now before going over to the store, remember that there are two traps that can be bought. One of these traps is the cage where it just locks up the furry animal without killing or harming it. The second one is the wire trap which makes use of a lot of pointed objects and will harm or possibly even kill gophers.
If one has already determined what kind of trap he wants to get, then he can proceed to finding where the gophers live. He can do this by locating a big mound with a big and deep hole which can be found in the middle of the mound. This hole is the entrance to their home and is also where they come out in order to get food.
Once the home of the gophers has been spotted, then the next step is to analyze their movements. At a certain time of the day, these rodents will scurry out of their holes in order to search for food. It is important to know when exactly they get out so that the trap may be planted right at the exact moment that they come out.
One very important point to take note of would be the fact that gophers can detect the scent of a person on certain things that he touches. That means that if the rodent knows what the lawn owner smells like, then he will know that the owner has put up the trap because he can smell the scent on the trap. So the best way to handle this dilemma is to wear some gloves.
When all of the preparations are done, now would be the time to get down to business. The first thing to do here would be to find an entrance and an exit hole of the gophers so that two traps can be set up. When one uses the cage trap, there is nothing much to think of except just putting some bait inside and leaving it there until the rodent gets stuck in it.
As compared to a cage trap, using a wire trap can be more of a challenge because it takes a while to set it up. Now if one decides to use a wire trap, he must always remember that there will be gophers that can pull the trap down. For this not to happen, the best thing to do would be to tie the trap to a stake so that it just stays there.
So basically, that is how to use two different kinds of gopher traps. Always remember to seal the holes after catching the rodents because new ones might pop up if the tunnel is still there. Try filling the tunnels with more dirt so none can come again.
Now before going over to the store, remember that there are two traps that can be bought. One of these traps is the cage where it just locks up the furry animal without killing or harming it. The second one is the wire trap which makes use of a lot of pointed objects and will harm or possibly even kill gophers.
If one has already determined what kind of trap he wants to get, then he can proceed to finding where the gophers live. He can do this by locating a big mound with a big and deep hole which can be found in the middle of the mound. This hole is the entrance to their home and is also where they come out in order to get food.
Once the home of the gophers has been spotted, then the next step is to analyze their movements. At a certain time of the day, these rodents will scurry out of their holes in order to search for food. It is important to know when exactly they get out so that the trap may be planted right at the exact moment that they come out.
One very important point to take note of would be the fact that gophers can detect the scent of a person on certain things that he touches. That means that if the rodent knows what the lawn owner smells like, then he will know that the owner has put up the trap because he can smell the scent on the trap. So the best way to handle this dilemma is to wear some gloves.
When all of the preparations are done, now would be the time to get down to business. The first thing to do here would be to find an entrance and an exit hole of the gophers so that two traps can be set up. When one uses the cage trap, there is nothing much to think of except just putting some bait inside and leaving it there until the rodent gets stuck in it.
As compared to a cage trap, using a wire trap can be more of a challenge because it takes a while to set it up. Now if one decides to use a wire trap, he must always remember that there will be gophers that can pull the trap down. For this not to happen, the best thing to do would be to tie the trap to a stake so that it just stays there.
So basically, that is how to use two different kinds of gopher traps. Always remember to seal the holes after catching the rodents because new ones might pop up if the tunnel is still there. Try filling the tunnels with more dirt so none can come again.
About the Author:
You can visit the website www.traplineproducts.com for more helpful information about How To Use Gopher Traps
No comments:
Post a Comment